Engine Simulator I

Test or setup engine management ECU. Generates many common trigger patterns. Software allows you to create new patterns and load them into the simulator.

Features:

5 x Trigger signal outputs
8 x Injector inputs
8 x Ignition inputs
10 x Low side auxiliary inputs.
4 x NTC temperature outputs.
8 x Analog 0 to 5 volt outputs.
8 x Digital outputs with high or low side switching.
1 x Digital PWM output.
Adjustable battery voltage from 6 volts to 19 volts.
Adjustable engine rpm from 40 rpm to 10,000 rpm
2 x Trigger pattern select buttons.
1 x Engine Start/Stop button
LED display shows selected pattern and running status.
USB port for software communications and firmware updates.
2 x 34 pin AMP connectors.
1 x 3.5mm power supply socket.


Trigger Signal Patterns:

Pulses per engine cycle from 2 to 48.
Missing tooth 24-1, 36.1, 36-2, 60-2.
Toyota 2JZ-GTE VVT-i
Subaru 1994-2000
Subaru 2001-2007
BMW S54
More patterns added upon request.
autosim002002.jpg autosim002001.gif

AutoSim

Click for larger image
Kit Contents:

Simulator
Power supply 110 to 240 volts
USB Cable
Adapter cables
Click for larger image
Price $1750 AUD